Last week, we were affected by a couple large tornadoes and our employees houses suffered heavy damage, so please be patient with tickets and shipping. We just returned to the office this week, but will be in/out to deal with insurance and repairs.

Product details

Features
  • Matter (w/Thread)
  • Full Color Notifications*
  • Multi-Tap Scene Control*
  • Smart Fan Mode
  • Non-Neutral Compatible¹
  • Multi-Way Compatible

    Please note that your platform must support these features. Platforms that support these features include: Apple Home, SmartThings, Hubitat, and Home Assistant.

    1. In a non-neutral setting, you will not be able to use the, "high" setting (only low and medium will work). In addition, you cannot use the switch on an exhaust fan.

    This fan switch works with AC Motors only. DC Motors are not supported.
Additional Features
  • Adjustable Fan Speed
  • Adjustable Ramp Rate
  • Breeze Mode
  • Full Color LED Bar
  • Auto-Off Timer
  • Overheat Protection
  • Over 15+ Parameters

    Please note that your platform must support these features. Platforms that support these features include: Apple Home, SmartThings, Hubitat, and Home Assistant.
Tech Specs
  • Power: 120V AC, 60Hz
  • Signal (Frequency): 2.4GHz
  • Operating Temperature Range: 32-95° F (0-35° C)
  • Maximum Load (Amps): 2.5 Amps (No more than 2 fans on the switch)
  • Range: Up to 100 meters line of sight between the Wireless Controller (HUB) and the closest Zigbee Module
  • Dimensions: Depth = 1.2" (3.0cm), Height = 2.8" (7.1cm), Width = 1.6" (4.1cm)
  • ETL Certified: Coming Soon
  • FCC Certified: Coming Soon
  • IC Certified: Coming Soon
  • Thread Certified: Coming Soon
  • Matter Certified: Coming Soon
Documents

Coming Soon

Compatible Platforms

The White Series Fan Switch works with the following platforms (if you do not see your platform listed, please reach out to support):

Apple¹
Google²
SmartThings³
Home Assistant⁴
Hubitat⁵ (C8 Only)

1. Requires a compatible device. See Apple Compatibility Chart.

2. Requires a compatible device. See Google Home Compatibility Chart.

3. Requires a compatible device. See SmartThings Hub Compatibility Chart.

4. Requires a Thread Border Router. See Approved Thread Border Routers. Amazon Echos are not approved at this time.

5. Requires a Thread Border Router. See Approved Thread Border Routers. Amazon Echos are not approved at this time.

NOTE: This switch is not compatible with Amazon Echo as their platform does not support the Matter Fan profile at this time.

Included in the Box

  • 1x Smart Switch

  • 1x Neutral Wire Jumper

  • Instruction Manual

  • Switch Setup Insert

One Switch to Rule Them All .

For those that desire the best, you've arrived. From the sleek full color LED Bar, to the glossy finish of the switch, to the satisfying click of the paddle, enjoy Matter and Thread's first and only premium light switch.

But this switch isn't just all looks. Under the hood, we've packed in every idea, every enhancement, and thought through every scenario your smart home could become.

Built by 1,000's of our community members, this switch redefines what smart lighting can be.

FAQs

Please see our knowledge base for more information. Additionally, you can click on the red bubble to start a chat or submit a ticket.

Does this switch require a hub?

Yes, this switch requires a hub that supports Thread.

What is the difference between the Red, White and Blue Series?

To understand the differences between the various series, please check out our article which breaks down the features of each.

Can I use this switch on multiple ceiling fans?

Yes, you can use this switch with multiple ceiling fans as long as the total load is below the max amperage (2.5A).

However, there is a limitation in that your high speed will work fine, but the low and medium speeds will be reduced by half due to those speeds being regulated by capacitors, which will limit the output power.

Are there any limitations in a non-neutral setup?

Yes, if you are using this switch in a non-neutral setup, there are a couple of limitations:

  1. You will not be able to use the high speed (only low and medium will work).
  2. You will not be able to use this switch on an exhaust fan.
Can this be used on exhaust and ceiling fans?

Yes, this switch can be used on both Exhaust or Ceiling Fans if they have AC Motors. If you are looking for a switch that works as an On/Off switch for DC Motors, please check out our White Series On/Off Switch (w/Temperature and Humidity Sensing).

Can this be used with DC Fan Motors?

No, this can only be used with AC Fan Motors.

Can this be used for lighting?

No, this switch cannot be used with any sort of lighting. We recommend the White Series Dimmer Switch.

Can I use this on a shared fan and light load?

No, this switch is to only be used on AC fan loads. If your ceiling fan has both a light and fan motor, we suggest the White Series Fan/Light Canopy Module. If your exhaust fan has both a light and a fan motor, we suggest the White Series On/Off Switch (w/Temperature and Humidity Sensors).

Does this switch support 240V or 277V?

No, this switch only supports 120V. If you're looking for a 277V option, please check out our On/Off Switch (w/Temperature and Humidity Sensing).

Can you turn off the LED Bar?

Yes, you can set the LED Bar intensity (off to 100%) when the light is on or off.

Is there a faceplate included? If not, what faceplate do you recommend?

No, there is no faceplate inside the box. We recommend Lutron Claro faceplates as we based our colors off of them.