Black Series On/Off Switch (Z-Wave)

Black Series On/Off Switch (Z-Wave)

On/Off switch, requires a neutral.
explode-animation:
on-off
explode-text|1. Easy Configuration:
No need to program the switch at the HUB anymore (via an app or website). Configure all your favorite settings directly from the switch itself!
explode-text|2. Z-Wave Plus:
Build your mesh network with the latest Z-Wave chipset (now with our custom module which allows for better range).
explode-text|3. Control Fans & Lights:
Now you can turn on and off both lights and fans! Perfect for exhaust fans.
explode-text|4. Easy 3-Way Installation:
Choose whether you’d like to use another smart switch, an auxiliary switch or leave your existing switch in place. The choice is yours!
360-content|Ultimate Control:

Welcome to the Next Generation of Smart Switches.

You asked, we listened. Upgraded hardware and firmware, allowing for infinite customization.

Inovelli’s new on/off switch is packed with features and designed with your house in mind.

custom-paddle-option:
184
(19 reviews) Write a Review

Write a Review

Black Series On/Off Switch (Z-Wave)

Was: $33.00
Now: $25 .00
Earn rewards points
Black Series On/Off Switch (Z-Wave)

Out of Stock: click here for updates

Want to buy refurbished? Click here
Capabilities
Dimensions

Dimensions

Under The Hood

Z-Wave Plus

Built using the powerful Z-Wave plus Module, the Z-Wave Plus Certified Black Series On/Off is packed with features making it more advanced than our prior switches. These are also OTA (Over-The-Air) Ready allowing us to keep your switch up to date and future-proof.

  • Z-Wave Signal Strength Notifier

    Know if your Z-Wave switch is within range when installing. If it flashes red, the switch is out of reach of the HUB. If it flashes green, you are good to go!

  • Built in Configuration Button

    We’ve found in the past that not every HUB allows parameter changes (Wink) so we built this switch to account for this. Now, you can customize your switch by holding down the config button and following a tapping sequence to change just about everything you can imagine (ie: LED color, etc).

Under The Hood
Compatible HUBs

Compatible HUBs

Looking for information to setup your new switch? Select your hub below to get to setup instructions, device handlers or drivers.

SmartThings

SmartThings

Smart Things handlers unlock special features on your device. Follow the directions to take your already sweet device to the next level!

Learn More
Hubitat

Hubitat

Find installation and setup instructions for pairing your LZW30 Black Series On/Off Switch to Hubitat.

Learn More
Wink

Wink

Everything you need to pair your LZW30 Black Series On/Off switch to Wink! Follow the link to get get started.

Learn More
Vera

Vera

All in one spot get everything you need to setup your LZW30 Black Series On/Off Switch on your Vera hub. Click here to get started.

Learn More
Wink

Home Assistant

Everything you need to pair your LZW30 Black Series On/Off switch to Home Assistant! Follow the link to get get started.

Learn More
HomeSeer

HomeSeer

Installation and Setup instructions for your LZW30 Black Series On/Off Switch for HomeSeer. Click. Follow. Get started!

Learn More

For a full list, click below

View All Compatible Hubs

Alexa or Google Home?

Smart speakers are NOT Z-Wave hubs so they won't work directly with any Z-Wave devices. But you can use a compatible Z-Wave hub with smart speaker integration to control your dimmer with voice control. These include the Fibaro hubs, Hubitat, SmartThings, Vera, and Wink.

Still confused? Get in touch!

Device Docs (Manual, Wiring Diagrams)

Device Docs

Looking for a digital copy of your instruction manual or wiring schematics? Hey, we're just glad you're reading it!

Instruction Manual, Wiring Schematics

Capabilities

Ultimate Control

Welcome to the Next Generation of Smart Switches.

You asked, we listened. Upgraded hardware and firmware, allowing for infinite customization.

Inovelli’s new on/off switch is packed with features and designed with your house in mind.

Construction

Exploded Dimmer Switch 1
 2
 3
 4

1. Easy Configuration

No need to program the switch at the HUB anymore (via an app or website). Configure all your favorite settings directly from the switch itself!

2. Z-Wave Plus

Build your mesh network with the latest Z-Wave chipset (now with our custom module which allows for better range).

3. Control Fans & Lights

Now you can turn on and off both lights and fans! Perfect for exhaust fans.

4. Easy 3-Way Installation

Choose whether you’d like to use another smart switch, an auxiliary switch or leave your existing switch in place. The choice is yours!

Black Series On/Off Switch (Z-Wave) breaking apart Black Series On/Off Switch (Z-Wave) breaking apart Black Series On/Off Switch (Z-Wave) breaking apart Black Series On/Off Switch (Z-Wave) breaking apart Black Series On/Off Switch (Z-Wave) breaking apart Black Series On/Off Switch (Z-Wave) breaking apart Black Series On/Off Switch (Z-Wave) breaking apart Black Series On/Off Switch (Z-Wave) breaking apart Black Series On/Off Switch (Z-Wave) breaking apart Black Series On/Off Switch (Z-Wave) breaking apart Black Series On/Off Switch (Z-Wave) breaking apart Black Series On/Off Switch (Z-Wave) breaking apart Black Series On/Off Switch (Z-Wave) breaking apart Black Series On/Off Switch (Z-Wave) breaking apart Black Series On/Off Switch (Z-Wave) breaking apart Black Series On/Off Switch (Z-Wave) breaking apart Black Series On/Off Switch (Z-Wave) breaking apart Black Series On/Off Switch (Z-Wave) breaking apart Black Series On/Off Switch (Z-Wave) breaking apart Black Series On/Off Switch (Z-Wave) breaking apart Black Series On/Off Switch (Z-Wave) breaking apart Black Series On/Off Switch (Z-Wave) breaking apart Black Series On/Off Switch (Z-Wave) breaking apart

Compare

Black Series On/Off Switch (Z-Wave)

Compare Black Series On/Off Switch (Z-Wave)

Easy 3-Way Setup

Z-Wave Range Notifier

Configure Without a HUB

Smart Bulb Compatible

The Corporate Brand

Compare corporate brand light switch

Easy 3-Way Setup

Z-Wave Range Notifier

Configure Without a HUB

Smart Bulb Compatible

Black Series On/Off Switch (Z-Wave)

Was: $33.00
Now: $25 .00
Black Series On/Off Switch (Z-Wave)
Buy Now

Reviews

19 Reviews
Write a Review

  • 5
    black series on/off switch

    Posted by mel on May 25th 2021

    once you get the hang of programing these switches for your own personal use and preference they are the best ever ...

  • 5
    Easy to install, works great!

    Posted by Stephen Schlie on Apr 2nd 2021

    Switch comes with great instructions that are easy to follow if you have ever wired up an outlet or switch, possibly even if you haven't. It is very responsive in my Home Assistant setup using ZWaveJS, would highly recommend!

  • 5
    Great Customer Service and Products

    Posted by Luke Hemarga on Mar 30th 2021

    I started using Inovelli product I think closed to 2 yrs ago. It was a graat product and easy to configured. It was the only product I found that can be used together with the dumb switch. Originally I connect with Wink but switch to SmartThink when Wink started to acting up. At first I was not familiar with SmartThink and requested support help. Much to my surprised the Company Founder, Eric personally provide the support on how to do this and that using SmartThink. He could have just tell me to look up it on forum or google but no he responded my email and provided the help needed. From that day onwards I am convinced of this great company and have been building up my home automation with pretty much using Inovelli products only. Recently I have issue with one of the switch where it was acting up, and this time Nate walk me trough the trouble shooting and requested me to return the switch and send replacement will be sent. Again I am very appreciative with this company level of support and they will back you up when issue occurred. I have been referring anyone who want to use Z-wave switches to go with Inovelli products and will continue to do so.

  • 5
    Works Great, Excellent Support

    Posted by chack on Mar 26th 2021

    My devices paired without issue and are well supported by Hubitat with Inovelli's drivers. The community support is also exceptional and I've been very happy with the LZW30's. I prefer the energy monitoring provided with the Red series switches, but went with a couple of the Black series as well courtesy of the price point.

  • 5
    Works perfectly and looks great

    Posted by Justin Appleby on Mar 4th 2021

    I built my first smart home system in 2014 with the original Vera hub and I have tried an assortment of Z-wave switches, from Ge/Honeywell (Jasco) to Linear to Leviton to HomeSeer, and all of Inovelli's switches have blown the rest out of the water. They are quite simply the best Z-wave switches I have ever used.

  • 5
    Nice quality

    Posted by Jason Kiser on Mar 3rd 2021

    Switches are nicely made and pair up quickly and haven't had any issues so far.

  • 5
    Worked great

    Posted by Kevin on Feb 18th 2021

    Great build quality and setup with my smartThings hub. Instructions were clear and easy to follow.

  • 5
    Great Customer Service

    Posted by Fred on Feb 18th 2021

    I had an issue with two of my switches with the internal led no longer working. Tech support walked me through troubleshooting the issue to determine the switches were defective and sent me new switches. Great service from a great company.

  • 5
    Stable and reliable switch with a nice click.

    Posted by Remek on Feb 5th 2021

    Purchased this switch Black Friday 2018 as a comparison to the few GE/Jasco switches that I installed around the house. Two years in, and this switch has been a stable and reliable part of my Z-wave mesh. It was simple to install, easily discovered by the hub, and it has a click that the whole family prefers over the other switches. The current plan is to install the new Red Series switches in the rest of the house. The colored LED notification and scene capabilities are worth the extra few bucks over the older switches. Highly recommended.