Inovelli’s new Red Series Smart LED Strip has over 45 pre-programmed effects and individually addressable LEDs
There are a lot of features going on and we're going to break them down!
Individually Addressable LEDs: Whether you're using a flashing effect or our team’s overall favorite (effect number 10); each of the LEDs on the strip can be included in an effect so the strip isn't just one color at a time!
- Quick Effects: The same as notifications on our switch line
- Custom Effects: Allows you to combine multiple colors, transitions, timing, etc. to create a customized effect
- Pixel Effects: There are currently 46 pixel effects pre-programmed into the controller with some really cool animations that take advantage of the individually addressable LEDs - More will be added via firmware update based on community feedback (to access pixel effect settings click here)
What comes in the box?
The Smart LED Strip comes with five 12 inch (6-pin) sections, two 6 inch (6-sections), one Z-Wave Plus Controller and a 12-V Power Adapter stretching out to six feet in total length.
Our LED Strips connect with a snap and come in 12 inch and 6 inch sections. This helps cut down on unnecessary waste and irritating cutting. You can connect up to 16ft of 12 inch and 6 inch sections to fully create your custom setup.
Accessories: There are additional LED Strip accessories available to add even more customization to your setup.
L Adapters allow for true right angles and T Adapters provide even more turns for your setup. You can add length to your Smart LED Strips with 6 inch and 12 inch LED Lightstrip Extensions for additional LEDs and a 4 ft extension cord for added length without extra LEDs!
Learn how to set up notifications with the Red Series Smart LED Strip for Smarthings users here.