R-LZW31-SN
Smart Dimmer Switch
Red Series • Z-Wave 500 Series
- In stock, ready to ship
- Inventory on the way
Please see the following link for a full list of compatible hubs:
If you don't see your hub listed, please do not purchase this switch until confirming it's compatible by contacting us.
Neutral Wire Required: No (but recommended)
Driver Type: MOSFET
Max Wattage: See below -- maximum will vary based on bulb type and whether the heat sink tabs are removed or not
- Heat Sink Tabs Not Removed:400W Incandescent, 300W LED, 150W CFL
- One (1) Side Heat Sink Tabs Removed:Â 300W Incandescent, 200W LED, 150W CFL
- Two (2) Sides Heat Sink Tabs Removed:Â 200W Incandescent, 150W LED, 100W CFL
Min Wattage: If neutral wire is used, there is no minimum wattage required. However, if no neutral is installed, there needs to be at least 25W for the switch to work
Use with Fan: No
Power:Â 120V AC, 60Hz
Operating Temperature Range: 32-95° F (0-35° C)
-----
Technology: Z-Wave Plus, S2 Encryption, SmartStart
Z-Wave Chip: 500 Series
Signal (Frequency):Â 908.42 MHz
Range:Â Up to 100 meters line of sight between the Wireless Controller (HUB) and the closest Z-Wave Module
Dimensions: Depth = 1.2" (3.0cm), Height = 2.8" (7.1cm), Width = 1.6" (4.1cm)
-----
UL Certified:Â E508406
FCC Certified:Â 2AB2QLZW31SN
IC Certified:Â 10256A-LZW31SN
Z-Wave Certified:Â ZC10-19096762
For indoor use. Specifications subject to change without notice due to continuing product improvement.
1x Smart Switch (White)
1x Faceplate (White)
1x Instruction Manual
1x Neutral Wire Jumper
Please see the following link for the manual: Red Series Dimmer Manual