Product details

Features
  • Matter (w/Thread)
  • Individual Control of Fan Speed and Bulb Dim Level
  • Smart Bulb & Fan Mode
  • Leading & Trailing Edge Dimming

    Please note that your platform must support these features. Platforms that support these features include: Apple Home, SmartThings, Hubitat, and Home Assistant.

    As this product is still in beta, some features may change. We will notify you if they do.

    This fan module works with AC Motors only. DC Motors are not supported.
Additional Features
  • Multi-Endpoint Binding
    (Connects the Fan Motor and Fan Light to your Blue Series Wall Switch via Zigbee Bindings)
  • Adjustable Dimming & Fan Speed
  • Adjustable Ramp Rate for Fan Speed and Dimming
  • Set Min / Max Dim & Fan Level
  • Auto-Off Timer
  • Default Dim & Fan Level
  • Overheat Protection
  • Over 35+ Parameters

    Please note that your platform must support these features. Platforms that support these features include: Apple Home, SmartThings, Hubitat, and Home Assistant.

    As this product is still in beta, some features may change. We will notify you if they do.
Tech Specs
  • Power: 120V AC, 60Hz
  • Signal (Frequency): 2.4GHz
  • Operating Temperature Range: 32-95° F (0-35° C)
  • Maximum Load Light (Watts): 300W Incandescent, 150W LED, 100W CFL
  • Maximum Load Fan (Amps): 1.2A
  • Range: Up to 100 meters line of sight between the Wireless Controller (HUB) and the closest Zigbee Module
  • Dimensions: Depth = 1" (2.54cm), Height = 3" (7.62cm), Width = 2.13" (5.41cm)
  • ETL Certified: 5027290
  • FCC Certified: Coming Soon
  • IC Certified: Coming Soon
  • Thread Certified: Coming Soon
  • Matter Certified: Coming Soon
Compatible Hubs

The White Series Fan Light Canopy Module works with the following platforms (if you do not see your platform listed, please reach out to support):

Apple¹
Google²
SmartThings³
Home Assistant⁴
Hubitat⁵ (C8 Only)

1. Requires a compatible device. See Apple Compatibility Chart.

2. Requires a compatible device. See Google Home Compatibility Chart.

3. Requires a compatible device. See SmartThings Hub Compatibility Chart.

4. Requires a Thread Border Router. See Approved Thread Border Routers. Amazon Echos are not approved at this time.

5. Requires a Thread Border Router. See Approved Thread Border Routers. Amazon Echos are not approved at this time.

NOTE: This switch is not compatible with Amazon Echo as their platform does not support the Matter Fan profile at this time.

Included in the Box

  • 1x Smart Module

  • 4x Wire Nuts

  • Instruction Manual

  • Module Setup Insert

Pair with a Smart Switch.

Your canopy module allows for remote control of both the fan's motor and light from your favorite app.

Take it to the next level by installing a White Series smart switch and use automations to control the canopy module. Use the switches paddle to control the light and the switches favorite button to control the fan's motor.

Built by 1,000's of our community members, this module redefines what smart lighting can be.

FAQs

Please see our knowledge base for more information. Additionally, you can click on the red bubble to start a chat or submit a ticket.

What router/network requirements are there for Matter devices?

You will need to make sure IPv6 is turned on. If you are operating on a VLAN, the Matter Controller/Server must also operate on that VLAN. Finally, Matter devices and controllers must be on the same L2 network.

Does this module require a hub?

Yes, this module requires a hub that supports Thread.

What is the difference between the Red, White and Blue Series?

To understand the differences between the various series, please check out our article which breaks down the features of each.

Can this be used with DC Fan Motors?

No, this can only be used with AC Fan Motors.

Does this module support 240V or 277V?

No, this module only supports 120V.

Can you control the fan's motor and light separately?

Yes, this module allows you to control both the fan's light and motor individually.