NZW37 Quick Setup

Step By Step Video & Text Instructions

This is the full video broken up into step by step instructions.  You’ll be an expert when finished!

Full Video With Subtitles Installation

Full video of us walking you through the setup of your Plug-In Module (with subtitles in your language).

Step By Step Instructions

PDF version of step by step instructions as listed below.

Original Owner’s Manual

Just in case you tossed the manual or would just prefer to read it digitally.

For help troubleshooting your device, click here.

Step by Step Instructions

– Step 1 –
Find an Appropriate Outlet

Locate an indoor outlet which is grounded and within the recommended distance (less than 100ft) from your Z-Wave Hub/Gateway.

Note: Walls, furniture, and other obstructions may affect the communication between the Plug-In Module and your Hub/Gateway, so please keep this in mind when selecting our location.

ZW37 Wall_edited-1

-Step 2-
Plug In Lamp/Appliance(s)

Before plugging in your module, please plug in the device(s) you are looking to control.  In addition, make sure that both devices together do not equal more than 10 Amps.

Note: It is not recommended plugging in space (electric) heaters, or any other appliances that may present a hazardous condition due to unattended, unintentional, or automatic power control.

ZW37 Wall_edited-1

-Step 3-
Plug In the Module & Sync

You are now ready to plug in your module and start to sync to your selected Z-Wave Hub/Gateway.  In this tutorial, we will show you how to start the syncing process with the SmartThings Hub.  If you have a different Hub/Gateway, please see the full videos below (or click here) if you are unsure how to start the syncing process with your Hub/Gateway.

Note: Currently, we only have full videos for Wink, SmartThings and Vera.  But since our product is Z-Wave Plus certified, it will work with all Z-Wave Hub/Gateways, unless the manufacturer has chosen to only work with select companies.

ZW37 Wall_edited-1

-Step 4-
Adding to the Network

Once you have started the process on your smartphone, tablet, or computer of adding your device, it’s time to officially add your product to the network.

When your Hub/Gateway is looking for your device, press the center button (front towards the top of the module) in and out 3-5 times within 3 seconds and wait for your Hub/Gateway to acknowledge the device.

Note: If, for some reason, the device is not found, please see our troubleshooting page, as it could be a number of things.  Also… we’re sorry for the inconvenience and are here to help.

ZW37 Wall_edited-1

-Step 5-
Customize & Enjoy!

Now that your Hub/Gateway has discovered and added your module, it’s time to make sure it is set up correctly.

Again, in this instance, we will show you how to set up the device on SmartThings, but if you have a different device, please feel free to watch the full videos below (or click here).

Note: If, for some reason, the device is not found, please see our troubleshooting page, as it could be a number of things.  Also… we’re sorry for the inconvenience and are here to help.

Full Installation Videos

Below you will find our full installation videos for the Plug-In Module.  Just as a note, at this time we only have installation videos for, SmartThings, Wink, and Vera, but will do our best to update as we purchase additional Hubs/Gateways.  As stated above, our Plug-In Module is Z-Wave Plus Certified, so it will work with any Z-Wave enabled Hub.  However, some Hubs/Gateways choose to only partner with certain companies.  If you have a Hub outside of these three that we’ve recorded and would like to contribute to our page by either writing up a tutorial or shooting a video, we would love to compensate you so that others can benefit.  Thank you for your purchase and we hope you enjoy your product!

SmartThings Installation

Vera Installation

Wink Installation

Other Z-Wave Installation