
LZW31
Smart Dimmer Switch
Black Series • Z-Wave 500 Series
Refurbished switches are sold, "as-is" and will only be replaced if there is a production defect. Please see FAQ's at the bottom or the, "Refubished Info" drop-down below for more info.
- In stock, ready to ship
- Inventory on the way
Please see the following link for a full list of compatible hubs:
SmartThings
Home Assistant - ZWave JS
Home Assistant - ZWave JS UI
Hubitat
If you don't see your hub listed, please do not purchase this switch until confirming it's compatible by contacting us.
Neutral Wire Required: No (but recommended)
Driver Type: MOSFET
Max Wattage: See below -- maximum will vary based on bulb type and whether the heat sink tabs are removed or not
- Heat Sink Tabs Not Removed:400W Incandescent, 300W LED, 150W CFL
- One (1) Side Heat Sink Tabs Removed: 300W Incandescent, 200W LED, 150W CFL
- Two (2) Sides Heat Sink Tabs Removed: 200W Incandescent, 150W LED, 100W CFL
Min Wattage: If neutral wire is used, there is no minimum wattage required. However, if no neutral is installed, there needs to be at least 25W for the switch to work
Use with Fan: No
Power: 120V AC, 60Hz
Operating Temperature Range: 32-95° F (0-35° C)
-----
Technology: Z-Wave Plus, S2 Encryption, SmartStart
Z-Wave Chip: 500 Series
Signal (Frequency): 908.42 MHz
Range: Up to 100 meters line of sight between the Wireless Controller (HUB) and the closest Z-Wave Module
Dimensions: Depth = 1.2" (3.0cm), Height = 2.8" (7.1cm), Width = 1.6" (4.1cm)
-----
UL Certified: E508406
FCC Certified: 2AB2QLZW31SN
IC Certified: 10256A-LZW31SN
Z-Wave Certified: ZC10-19096762
For indoor use. Specifications subject to change without notice due to continuing product improvement.
1x Smart Switch (White)
1x Faceplate (White)
1x Instruction Manual
1x Neutral Wire Jumper
Because we constantly keep our materials up to date, we house them in a community driven knowledge base.
Please click on the link below to view the most recent document (opens in a new tab):
All refurbished switches come with the same warranty as our new switches. They are sold, "as-is" and will only be replaced if there is a production defect.
There may be some scuffs on the back, heat sink tabs missing, or paint on the metal portion of the switch.
We can only guarantee that the room-facing portion (ie: the portion that people can see when operating the switch when a faceplate is on) of the switch is free from scuffs.