Red Series Dimmer Switch (10pk)
- White Paddle (Dimmer)
Our best seller and fan favorite, the Red Series Dimmer multiplied by 10 puts all other switches to shame with Scene Control, LED Notifications, No-Neutral Wire Required, Multi-Way Setup and so much more.
- Scene Control
Control up to 15 separate scenes. The up & down button support (1x tap, 2x, 3x, 4x, 5x, hold & release). Pressing the config button, a single time is also a scene. (Check compatible hubs list below for supported advanced features)
- LED Notifications
Have the LED Bar change colors or chase, flash, blink, pulse, etc. to notify you of changes going on in your home. For example, the garage door being left open, the security system being armed, the weather outside starting to rain, or even a text message. The possibilities are endless here. (Check compatible hubs list below for supported advanced features)
- Easy Configuration
We have created a method for customers to be able to change the devices configuration parameters directly by using the 3 buttons on the device itself. Great for hubs that do not let you edit the configuration options from their app.
- Multi-Way Setup
The switch provides several options for configuring a 3, 4-way circuit. You can choose from a dumb switch, an aux switch, or even another Inovelli Z-Wave switch (through direct association).
- No Neutral and Neutral Wiring Compatible
A perfect solution for older homes that may not have a neutral wire. In some cases, no-neutral setups under 25W will require a bypass (sold seperately).
Perfected By You
- Under the Hood
Z-Wave Plus Certified and OTA (Over-The-Air) allows us to keep your switch up to date and future-proof. Combine that with our Z-Wave Signal Strength Notifier and a built-in configuration button and your switch is set for any customization you can think of. Learn more about the tech behind our products here (Coming Soon).
- Community Driven and Approved
Our customers and community are the biggest driving force behind our products. All our products through research and development stages are published in our forum so our community members can provide their ideas and suggestions! This allows us to create truly amazing products that work in a variety of different homes. Check out our community and the product device thread here.
- Our Beta Testers are the Best
We hand select our beta testers from our community. The people we know can test our products to their fullest extent and who we trust to be honest and candid about how we can improve. Luckily, our beta testers have become some of our biggest inspirations, helping us make the products we have today.
Looking for information to setup your new switch? Select your hub below to get to setup instructions, device handlers or drivers.
Advanced Features available on SmartThings, Hubitat, Home Assistant, and HomeSeer only.
SmartThings handlers unlock special features on your device. Follow the directions to take your already sweet device to the next level!Learn More
Find installation and setup instructions for pairing your LZW31-SN Red Series Dimmer Switch to Hubitat.Learn More
Everything you need to pair your LZW31-SN Red Series Dimmer Switch to Home Assistant! Follow the link to get get started.Learn More
All in one spot get everything you need to setup your LZW31-SN Red Series Dimmer Switch for Alarm.com. Click here to get started.Learn More
Everything you need to pair your LZW31-SN Red Series Dimmer Switch to Ezlo Innovation! Follow the link to get get started.Learn More
Alexa or Google Home?
Smart speakers are NOT Z-Wave hubs so they won't work directly with any Z-Wave devices. But you can use a compatible Z-Wave hub with smart speaker integration to control your dimmer with voice control. These include the Fibaro hubs, Hubitat, SmartThings, Vera, and Wink.
Still confused? Get in touch!
Looking for a digital copy of your instruction manual or wiring schematics? Hey, we're just glad you're reading it!
Note, these are for our Gen 2 Dimmer Switches. Looking for a different switch? Visit our Wiki to see a full list of our product manuals and wiring diagrams.
Write a Review
Got twenty and change of these switches around my house. With my homeassistant setup they are pretty much instantaneously responsive and easy to wire into automation. The build quality is great and they are so much nicer to install than some other smart switches I used. Never had any problem adding/removing them from the zwave mesh. I do wish home assistant support was better. In hubitat the LED is coded as a light device that can be controlled as such/color. I had to implement lights as a platform over zwave in homeassistant myself to support the same. would recommend!
Love these Switch's Work well and is super easy to add to home assistant! The issue for me was stated in the manual but missed. 8 of my 10 locations had a load of under 25w on a non-neutral install. had to spend another $15 a switch (plus shipping) and wait weeks for cross-boarder shipment to finish my setup.
Absolutely love how these switches look and function. Works flawlessly with Home Assistant with the Z-Wave JS to MQTT add-on. I was able to associate 4 switches so they can work together even if the hub goes offline. The only issue I had was finding the best documentation for setting up the switch as some of the help documents were out-of-date due to firmware updates... and another plus is that there are firmware updates!
I left more detailed reviews on the single dimmer switch pack, but needless to say, I've been so impressed with Inovelli's switches that I've picked up a bulk pack of these and the on/offs to start rewiring my entire house. I'm going to be buying another bulk pack of the dimmers when they come back in stock.
I really love these switches, I just wish I had a hubitat to bring it up to the next level, which will hopefully be soon. I just wish it had come with plate covers and even the little plastic rings that hold the screws on the switch when mounting in the box. I feel for over 500cdn plus the surprise 34$ custom fee i had to pay, they should of come with the plate covers aswell.
These are absolutely the best Z-Wave switches I have bought. They are visually appealing with the configurable status bar, there are too many configuration settings to go over them all (but so many are useful), and the ability to use without a neutral wire gives me options for my older home. There are two minor things I wish they would add: 1. A "minimum start at" setting. I have LED's that can turn down to 1% once lit, but cannot start at 1%. I could adjust the minimum dim level setting, but that would make them brighter than I want them. The proposed setting would give the bulbs a little extra juice on startup and then dim to the desired level. 2. A setting to disable dimming, effectively making this an on/off switch. I know they also sell on/off switches, but I'd rather buy the dimmers in bulk and decide at install what they do. Alternatively, allow setting the minimum dimming to be 100% would achieve the same thing.
I rarely write reviews but these are some great switches. The LED indicators are very nice. Easy to install, great documentation. These also work great with SmartThings and all the parameters can be configured through ST instead of the button pushing routine. Hands down best smart switches/dimmers I've used.
I took a bit of a risk buying 10 of these having never used them before. But I like the company and I had a couple of the bulbs already so I went for it. These are, hand down, my favorite switches that I've used in the history of... ever. Not only are they well built, they are easy and quick to configure. I'm using these with home assistant and love (more than I thought I would) the ability to double tap for an extra scene. It opens up a whole new world of what I can do with wall switches. In my bathroom, a double tap up on the switch turns on music in the in-wall speakers. A double tap up on another switch skips the track. I'm like a little kid in a toy store with these things. Also, the LED indicators are beautiful looking. I wasn't sure I was going to like them, but they really do look good. I love that by default they stay on very dimly so you can see where the switches are in the dark. Finally, the fact that pretty much every parameter you can think of is programmable is nothing short of magical. Well done, inovelli.