Red Series On/Off Switch (10pk)
- White Paddle (On/Off)
Under The Hood
Built using the powerful Z-Wave plus Module, the Z-Wave Plus Certified Red Series On/Off is packed with features making it more advanced than our prior switches. These are also OTA (Over-The-Air) Ready allowing us to keep your switch up to date and future-proof.
- Z-Wave Signal Strength Notifier
Know if your Z-Wave switch is within range when installing. If it flashes red, the switch is out of reach of the HUB. If it flashes green, you are good to go!
- Built in Configuration Button
We’ve found in the past that not every HUB allows parameter changes (Wink) so we built this switch to account for this. Now, you can customize your switch by holding down the config button and following a tapping sequence to change just about everything you can imagine (ie: LED color, etc).
Looking for information to setup your new switch? Select your hub below to get to setup instructions, device handlers or drivers.
Smart Things handlers unlock special features on your device. Follow the directions to take your already sweet device to the next level!Learn More
Find installation and setup instructions for pairing your LZW30-SN Red Series On/Off Switch to Hubitat.Learn More
Everything you need to pair your LZW30-SN Red Series On/Off switch to Wink! Follow the link to get get started.Learn More
All in one spot get everything you need to setup your LZW30-SN Red Series On/Off Switch on your Vera hub. Click here to get started.Learn More
Everything you need to pair your LZW30-SN Red Series On/Off switch to Home Assistant! Follow the link to get get started.Learn More
Installation and Setup instructions for your LZW30-SN Red Series On/Off Switch for HomeSeer. Click. Follow. Get started!Learn More
For a full list, click belowView All Compatible Hubs
Alexa or Google Home?
Smart speakers are NOT Z-Wave hubs so they won't work directly with any Z-Wave devices. But you can use a compatible Z-Wave hub with smart speaker integration to control your dimmer with voice control. These include the Fibaro hubs, Hubitat, SmartThings, Vera, and Wink.
Still confused? Get in touch!
Write a Review
I left more detailed reviews on the On/Off single switch pack, but needless to say, I've been so impressed with Inovelli's switches that I've picked up a bulk pack of these and the dimmers to start rewiring my entire house.
I've looked high and low for a solid zwave switch that would work well with Home-Assistant. I have several 3-way and 4-way setups that were a bit difficult to work with. All those little "can-can" style toggle switches. It was maddening. I replaced a couple switches at first to test them out... and bam! Every single last feature I didn't know I needed or wanted was right there. Coupled with my smart lights strewn through the house and some crafty scripting, I was able to convert the Red Series Switches into active dimmers. Once the target lights were on, I could simply double-tap to make them brighter or dimmer. The build quality is better than other smart switches I have. Pairing was a since even.
These switches are great!