Red Series On/Off Switch (Z-Wave)

Red Series On/Off Switch (Z-Wave)

On/Off switch, requires a neutral wire.
product-url:
/on-off-red-series/
explode-animation:
on-off
explode-text|1. Power Monitoring:
Easily monitor your energy consumption or activate scenes based on target power levels.
explode-text|2. Easy 3-Way Installation:
Choose whether you’d like to use another smart switch, an auxiliary switch or leave your existing switch in place. The choice is yours!
explode-text|3. Scene Control:
Add up to 13 scenes to your switch for full control over your entire house. Example: Double tap to turn off all lights, lock the doors, and set the temperature to 68.
explode-text|4. Built in Notifications:
Have your switch notify you by color when your garage door is left open, or if your window sensor is triggered after 10pm.
360-content|Ultimate Control:

Welcome to the Next Generation of Smart Switches.

You asked, we listened. Upgraded hardware and firmware, allowing for infinite customization.

Inovelli’s new on/off switch is packed with features and designed with your house in mind.

custom-paddle-option:
184
(23 reviews) Write a Review

Red Series On/Off Switch (Z-Wave)

$38 .00
Earn rewards points

Out of Stock: click here for updates

Want to buy refurbished? Click here
Capabilities
Dimensions

Dimensions

Under The Hood

Z-Wave Plus

Built using the powerful Z-Wave plus Module, the Z-Wave Plus Certified Red Series On/Off is packed with features making it more advanced than our prior switches. These are also OTA (Over-The-Air) Ready allowing us to keep your switch up to date and future-proof.

  • Z-Wave Signal Strength Notifier

    Know if your Z-Wave switch is within range when installing. If it flashes red, the switch is out of reach of the HUB. If it flashes green, you are good to go!

  • Built in Configuration Button

    We’ve found in the past that not every HUB allows parameter changes (Wink) so we built this switch to account for this. Now, you can customize your switch by holding down the config button and following a tapping sequence to change just about everything you can imagine (ie: LED color, etc).

Under The Hood
Compatible HUBs

Compatible HUBs

Looking for information to setup your new switch? Select your hub below to get to setup instructions, device handlers or drivers.

SmartThings

SmartThings

Smart Things handlers unlock special features on your device. Follow the directions to take your already sweet device to the next level!

Learn More
Hubitat

Hubitat

Find installation and setup instructions for pairing your LZW30-SN Red Series On/Off Switch to Hubitat.

Learn More
Wink

Wink

Everything you need to pair your LZW30-SN Red Series On/Off switch to Wink! Follow the link to get get started.

Learn More
Vera

Vera

All in one spot get everything you need to setup your LZW30-SN Red Series On/Off Switch on your Vera hub. Click here to get started.

Learn More
Wink

Home Assistant

Everything you need to pair your LZW30-SN Red Series On/Off switch to Home Assistant! Follow the link to get get started.

Learn More
HomeSeer

HomeSeer

Installation and Setup instructions for your LZW30-SN Red Series On/Off Switch for HomeSeer. Click. Follow. Get started!

Learn More

For a full list, click below

View All Compatible Hubs

Alexa or Google Home?

Smart speakers are NOT Z-Wave hubs so they won't work directly with any Z-Wave devices. But you can use a compatible Z-Wave hub with smart speaker integration to control your dimmer with voice control. These include the Fibaro hubs, Hubitat, SmartThings, Vera, and Wink.

Still confused? Get in touch!

Device Docs (Manual, Wiring Diagrams)

Device Docs

Looking for a digital copy of your instruction manual or wiring schematics? Hey, we're just glad you're reading it!

Instruction Manual, Wiring Schematics

Capabilities

Ultimate Control

Welcome to the Next Generation of Smart Switches.

You asked, we listened. Upgraded hardware and firmware, allowing for infinite customization.

Inovelli’s new on/off switch is packed with features and designed with your house in mind.

Construction

Exploded Dimmer Switch 1
2
3
4

1. Power Monitoring

Easily monitor your energy consumption or activate scenes based on target power levels.

2. Easy 3-Way Installation

Choose whether you’d like to use another smart switch, an auxiliary switch or leave your existing switch in place. The choice is yours!

3. Scene Control

Add up to 13 scenes to your switch for full control over your entire house. Example: Double tap to turn off all lights, lock the doors, and set the temperature to 68.

4. Built in Notifications

Have your switch notify you by color when your garage door is left open, or if your window sensor is triggered after 10pm.

Red Series On/Off Switch (Z-Wave) breaking apart Red Series On/Off Switch (Z-Wave) breaking apart Red Series On/Off Switch (Z-Wave) breaking apart Red Series On/Off Switch (Z-Wave) breaking apart Red Series On/Off Switch (Z-Wave) breaking apart Red Series On/Off Switch (Z-Wave) breaking apart Red Series On/Off Switch (Z-Wave) breaking apart Red Series On/Off Switch (Z-Wave) breaking apart Red Series On/Off Switch (Z-Wave) breaking apart Red Series On/Off Switch (Z-Wave) breaking apart Red Series On/Off Switch (Z-Wave) breaking apart Red Series On/Off Switch (Z-Wave) breaking apart Red Series On/Off Switch (Z-Wave) breaking apart Red Series On/Off Switch (Z-Wave) breaking apart Red Series On/Off Switch (Z-Wave) breaking apart Red Series On/Off Switch (Z-Wave) breaking apart Red Series On/Off Switch (Z-Wave) breaking apart Red Series On/Off Switch (Z-Wave) breaking apart Red Series On/Off Switch (Z-Wave) breaking apart Red Series On/Off Switch (Z-Wave) breaking apart Red Series On/Off Switch (Z-Wave) breaking apart Red Series On/Off Switch (Z-Wave) breaking apart Red Series On/Off Switch (Z-Wave) breaking apart

Compare

Red Series On/Off Switch (Z-Wave)

Compare Red Series On/Off Switch (Z-Wave)

Scene Control

Power Monitoring

Configure Without a HUB

Programmable Favorites

LED Bar Notifications

The Corporate Brand

Compare corporate brand light switch

Scene Control

Power Monitoring

Configure Without a HUB

Programmable Favorites

LED Bar Notifications

Reviews

23 Reviews
Write a Review

  • 5
    A Staple with slick options

    Posted by Pete on Jun 8th 2021

    These are amazing switches, they look great, and with a little programming can be very useful. Pretty much for any I have installed a single pus is for the main device (as is default) but for double taps (on and off) the room is controlled as a group !! Some have a 3 tap option for additonal items (like ceiling fans) The ones for the door lights also have 2 and 3 tap functions, and even special modes for the outdoor movie night ) certain ones on and others off or dimmed Extreme flexibility for the secondary functions (up to 5 easily tap and other held etc for up to 8). some of the inside switches use other functionality Great devices with awesome range and reliability ... ... just Automate it !!

  • 5
    BUY THEM NOW

    Posted by Chris Black on Jun 5th 2021

    These are, hands down, the best smart switches on the market. The amazing thing is that they're also the least expensive option too (among other Z-Wave switches), even with a recent price raise which in my opinion is more than fair given what Inovelli provides their customers. I'm running Home Assistant, and the experience has been seamless and smooth. The switches pair to my Z-Wave USB stick within minutes. They are very responsive and infinitely customizable - perfect for someone like me who likes to tinker and have things just the way I like them, but falls short of the "soldering and breadboards" type of tinkering (ie Sonoffs and Shellys in the walls... but if I'm honest, Inovelli switches work way better and are plug and play). It also is super apparent that Eric and the other Inovelli founders/officers care a great deal about their products and want people to have a great experience with them. There are detailed instructions in the manual, on their website, in the forums (both here and over on HA's forums, and I assume the other smarthome software forums). I had some trouble programming scenes, and within an hour or two and a few forums posts, I had things up and running, and most of the problems were my fault because I skipped a couple steps setting them up. Read the manual and you'll be fine. Inovelli is responsive, great to work with, and I have become such a huge fan just in the last few months that I am rewiring my entire house to use Inovelli switches (the exception being a few of GE's Addon switches for 3 and 4-way circuits to save a few bucks). If you are in the market for a Z-Wave switch, buy this, and buy it now! They're so highly sought after that they go out of stock more often than I'd like (which is probably my only, very small, complaint about Inovelli :)

  • 5
    Great switches. Easy install

    Posted by Doug on Apr 13th 2021

    Easy to install (I have a neutral) in a 3-way if you are at all comfortable installing electric switches. Make sure power is off!. Works well with Smartthings. Also really like the scenes (double tap). Wasn't sure what I was going to use it for but found a use on day 1! Now just looking for more ideas on triple tap, double tap down, etc.

  • 5
    Excellent switch and support

    Posted by chack on Mar 26th 2021

    My devices paired without issue, and are well supported by Hubitat with Inovelli's drivers. The community support is also exceptional and I've been very happy with the LZW30-SN's!

  • 5
    Awesome

    Posted by Peter Robbins on Mar 19th 2021

    It just works! Easy to install, easy to setup, works consistently.

  • 5
    Rule Changer

    Posted by Number14 on Mar 11th 2021

    Finally a switch with some "Sizzle"! This family of switches is filled with features that have been missing in Z-wave for a long time!

  • 5
    Best I've used

    Posted by Dennis Freed on Feb 2nd 2021

    I've been using Z-Wave since 2014, and have purchased/installed numerous switches and dimmers (GE/Jasco, Homeseer, ZWP, ZLINK, Honeywell). Inovelli, in conjunction with Hubitat, is leaps and bounds above the competition. Aesthetics, price, functionality, and tech support are enough to make me a brand loyalist.

  • 5
    Awesome Modern Bathroom Fan Switch

    Posted by Colin M on Dec 10th 2020

    Really love my red series switch for our bathroom fan: I get to "redesign" the switch to work JUST how I want... Turn the fan on with one tap (of course). Starts a 60 minute timer in my home automation hub. Hub sets a green blinking notification on the switch to show that the timer is running. Shiny. Then: tap up *again* later, and the hub gets the scene notification, adds 60 minutes to the timer, and sends me a few seconds of solid green to acknowledge. Then back to the blinking "timing" notification. So smooth :) And if I dream up something new, or want a new color, or... I can just "redesign" it again! Two taps to turn on the bedroom fan too, for extra humid days?

  • 5
    Red Switch

    Posted by Lance M on Nov 27th 2020

    These have increased the the approval factor for all in the house. The switches have an almost unlimited configuration ability, its like having multiple switches in one unit. I really want to thank Eric and crew for the outstanding customer service and support for their products. Looking forward to the new items coming from Inovelli!