Outdoor Z-Wave Plug-In Module (2-Channel)


Plug the Smart Outlet in. Sync. Control two Devices from Anywhere.

Control two outdoor devices with the Inovelli® Z-Wave Plus dual plug-in smart outlet + Z-Wave Repeater. With an IP65 rating, you can feel safe leaving your lights plugged in even in the harshest of weather (trust us, the Winters are frigid here in Michigan).

In stock (can be backordered)

SKU: 1D-6Y9F-ESTO Category: Tag:


Simple Setup

We hand picked this Dual Channel Z-Wave Plug-in Module because it is truly, “plug and play”, can be set up in less than 5 minutes and controls multiple devices. Plug it in, sync it and you’re done.

Remote Controllable

Turn on/off lights or appliances from anywhere in the world. Once synced up, you can control two separate devices. Set schedules, or trigger an event… the power is yours!

Show Home and Inovelli Smart Plugs are Z-Wave Plus Certified

Z-Wave Plus

The 2-Channel Smart Plug is certified Z-Wave Plus, making it one of the few on the market to really take Z-Wave seriously. With a built in signal repeater, this dual smart outlet is really a cut above the competition.

Compatible HUBS

Tested Compatible HUB/Gateways

► SmartThings (HUB 1.0 & 2.0)
► Wink (HUB 1.0 & 2.0)
► Vera (UI7 Only)
► HomeSeer
► Staples Connect
► Zipamini (Zipato)
► Alexa/Echo**

**Only works thru a compatible HUB – Please do not buy if you do not have an external HUB

Non-compatible HUB/Gateways*
This device is not FULLY compatible with:
► 2GIG
► Alarm dot com
► Abode
► ADT Pulse**
► Almond
► Frontpoint**
► Honeywell
► Intermatic
► Iris by Lowe’s**
► Leviton RF Installer Tool (Vizia)**
► Nexia
► Piper
► Qolsys IQ Panel**
► Samsung Connect***
► Universal Devices ISY944iZW
► Vivint**

*Note: You will only have control over one (1) outlet — we suggest our 1-Channel Outdoor Smart Plug

**Does not work at all with these HUB’s.

***This plug works with Samsung SmartThings, but not Samsung Connect — they are working on an integration between HUB’s but for now, this does not work.

Setup Instructions

Please click on the following HUB for specific setup instructions. If you do not see your HUB listed, please first check compatibility under the, “Description” tab and by scrolling down to the bottom of the page. If your HUB is compatible, but you do not see a link below, please click on, “General Z-Wave”.

SmartThings: www.inovelli.com/nzw97-setup/smartthings
Vera (must be running UI7): www.inovelli.com/nzw97-setup/vera
Wink: www.inovelli.com/nzw97-setup/wink
General Z-Wave: www.inovelli.com/nzw97-setup/other

Additional Resources:

  • Owner’s Manual: Coming Soon!


Device Handler Info

While this device works great out of the box with SmartThings, there are some additional features that make this one of the most versatile plugs on the market. Feel free to check out the features this handler provides below and if you’re interested, feel free to copy the handler code. Finally, if you’re new to installing handlers, there are step by step directions that will help you. As always, if you have any questions, feel free to contact us.

Device Handler Features
Device Handler Code
Step-by-Step Installation Instructions


There are no reviews yet.

Be the first to review “Outdoor Z-Wave Plug-In Module (2-Channel)”

Your email address will not be published. Required fields are marked *