Z-Wave Toggle Switch (On/Off) w/Scenes + Repeater


Wire up the Switch. Sync. Control Lights Manually & Remotely.

Control your lights in your smart house with the Inovelli® Z-Wave Plus in-wall toggle smart switch. In addition to being able to remotely control your devices, this smart switch also acts as a Z-Wave signal booster (repeater), giving you best of both worlds and can also be wired using your existing 3-Way setting in that you won’t need to purchase any auxiliary (add-on) switches.

Out of stock

Out of stock

SKU: RR-HJOZ-OCLZ Category: Tag:


Easy 3-Way

These switches will work in an existing 3-Way setup. No need for an, “add-on” switch.
Simply wire these up to a, “non-smart” (On/Off) switch and you’re good to go. See our wiring diagrams for more info.

Manual & Remote Controllable

Turn on/off lights manually (up = on // hold up = dim up // down = off // hold down = dim down) or remotely. Set schedules, or trigger an event… the power is yours!

Show Home and Inovelli Smart Plugs are Z-Wave Plus Certified

Z-Wave Plus

Our NZW31 Z-Wave Switch is certified Z-Wave Plus, making it one of the few on the market to really take Z-Wave seriously. With a built in signal repeater, this smart switch is really a cut above the competition.

Compatible HUBS

The scene function of this switch only works with SmartThings. All other HUB’s will have On/Off functionality only.

Tested Compatible HUB/Gateways

► SmartThings (HUB 1.0 & 2.0)
► Wink (HUB 1.0 & 2.0)
► Vera (UI5 & UI7)
► HomeSeer
► Staples Connect
► Zipamini (Zipato)
► Alexa/Echo**

**Only works thru a compatible HUB – Please do not buy if you do not have an external HUB

Non-compatible HUB/Gateway’s
► Alarm.com
► ADT Pulse
► Frontpoint
► Iris by Lowe’s
► Leviton RF Installer Tool (Vizia)

► Qolsys IQ Panel
► Vivint
► Samsung Connect*

While we’ve done our best to test as many HUB/Gateway’s as possible, please confirm that the HUB/Gateway you are pairing to supports dimming.

*This switch works with Samsung SmartThings, but not Samsung Connect — they are working on an integration between HUB’s but for now, this does not work.

Setup Instructions

Please click on the following HUB for specific setup instructions. If you do not see your HUB listed, please first check compatibility under the, “Description” tab and by scrolling down to the bottom of the page. If your HUB is compatible, but you do not see a link below, please click on, “General Z-Wave”.

SmartThings: www.inovelli.com/nzw30T-setup/smartthings
Vera: www.inovelli.com/nzw30T-setup/vera
Wink: www.inovelli.com/nzw30T-setup/wink
General Z-Wave: www.inovelli.com/nzw30T-setup/other

Additional Resources:

Device Handler Info

While this device works great out of the box with SmartThings, there are some additional features that make this one of the most versatile switches on the market. Feel free to check out the features this handler provides below and if you’re interested, feel free to copy the handler code. Finally, if you’re new to installing handlers, there are step by step directions that will help you. As always, if you have any questions, feel free to contact us.

Scene Control: It’s important to install this device handler along with the, “Advanced Button Control” SmartApp to successfully setup your switch (click here to be taken to that tab).

Here’s how the switch will operate with scene control:

  • Tap UP Toggle 1x = Turns wired light ON
  • Tap DOWN Toggle 1x = Turns wired light OFF
  • Tap UP Toggle 2x = Activates Scene #1
  • Tap DOWN Toggle 2x = Activates Scene #2
  • Tap UP Toggle 3x = Activates Scene #3
  • Tap DOWN Toggle 3x = Activates Scene #4
  • Tap UP Toggle 4x = Activates Scene #5
  • Tap DOWN Toggle 4x = Activates Scene #6
  • Tap UP Toggle 5x = Activates Scene #7
  • Tap DOWN Toggle 5x = Activates Scene #8
  • Hold UP Toggle for 3 seconds = Activates Scene #9
  • Hold DOWN Toggle for 3 seconds = Activates Scene #10

Device Handler Features

Device Handler Code

Step-by-Step Installation Instructions


Our In-Wall (Z-Wave Plus) Z-Wave Switch & Repeater comes with the following certifications. Feel free to click on the links for verification and/or download them in pdf form. Thanks again for your support and if you have any questions, feel free to contact us.

UL Listing # – E464831* | PDF | Website
FCC Certification – OXGZW36 | PDF | Website
Z-Wave Plus Certification – ZC10-17045561 | PDF | Website

* NOTE: NZW36, NZW37, NZW39, NZW30, NZW31, NZW32 all share the same UL listing. You will see a reference in the report showing all three. We just wanted to call this out in case you were wondering.


There are no reviews yet.

Be the first to review “Z-Wave Toggle Switch (On/Off) w/Scenes + Repeater”

Your email address will not be published. Required fields are marked *