Z-Wave Switch (On/Off) + Repeater


Wire up the Switch. Sync. Control Lights Manually & Remotely.

Control your lights in your smart house with the Inovelli® Z-Wave Plus in-wall smart switch. In addition to being able to remotely control your devices, this smart switch also acts as a Z-Wave signal booster (repeater), giving you best of both worlds.

This switch allows you to use your existing 3-Way setting in that you won't need to purchase any auxiliary (add-on) switches. Simply wire your Inovelli switch to any, “non-smart” switch and you can control your 3-Way lights as normal.  This smart switch also works with SmartThings, works with Wink, works with IFTTT (if this then that), works with Amazon Alexa (Echo) and many, many more.  Now that's awesome.

For more information on how to set this up in your home, please see our NZW30 Quick Setup page which walks you through a quick 5 minute setup.  Simplifying lives, one smart home product at a time, that’s Inovelli®.

Out of stock

Out of stock



Easy 3-Way

These switches will work in an existing 3-Way setup. No need for an, “add-on” switch.
Simply wire these up to a, “non-smart” switch and you’re good to go. See our wiring diagrams for more info.

Manual & Remote Controllable

Turn on/off lights manually (up = on // down = off) or remotely. Set schedules, or trigger an event… the power is yours!

Show Home and Inovelli Smart Plugs are Z-Wave Plus Certified

Z-Wave Plus

Our NZW30 Z-Wave Switch is certified Z-Wave Plus, making it one of the few on the market to really take Z-Wave seriously. With a built in signal repeater, this smart switch is really a cut above the competition.

The Z-Wave Plus Smart Switch & Repeater Plays Well With Others

As a full member of the Z-Wave Alliance, all Inovelli™ products and partner products integrate seamlessly with other Z-Wave compatible hubs, controllers and/or gateways.

What is Z-Wave?  Great question.  In layman’s terms, it is a language spoken that connects various smart home devices and is currently the world market leader in wireless control. (www.z-wavealliance.org/about_z-wave_technology/)

What does that mean to you?  Well, it means that our zwave in-wall switch will likely work with your gateway of choice (see above tab for full compatibility).  It allows Inovelli® Z-Wave products to talk to non-Inovelli® Z-Wave products (there are over 1700 interoperable Z-Wave products from over 450 companies), allowing you to set schedules, trigger events, or create robots, making your life simpler and smarter.

As a bonus, the NZW30 Smart Switch acts as a Z-Wave Repeater (Range Extender), allowing greater distance for your Z-Wave network!

Setup Instructions

Please click on the following HUB for specific setup instructions. If you do not see your HUB listed, please first check compatibility under the, “Description” tab and by scrolling down to the bottom of the page. If you’re HUB is compatible, but you do not see a link below, please click on, “General Z-Wave”.

SmartThings: www.inovelli.com/nzw30-setup/smartthings
Vera: www.inovelli.com/nzw30-setup/vera
Wink: www.inovelli.com/nzw30-setup/wink
General Z-Wave: www.inovelli.com/nzw30-setup/other

Additional Resources:

Device Handler Info

Quick Reference: NZW30 Device Handler

NZW30 Highlights:

While this device works great out of the box with SmartThings, however, if you’d like to take advantage of a few additional features, please feel free to install the below device handler.

Here’s what else the device handler provides:

Automatic shutoff

  • Allows you to set the amount of time (in seconds) that your plug will automatically shut off.
  • This is helpful if you have your switch installed in a place where you’re worried about leaving it on.

LED Status

  • Allows you to toggle the status of the LED light (default is: LED is OFF when Switch is ON)
    • Disable LED
    • LED is OFF when Switch is ON
    • LED is OFF when Switch is OFF

Invert Switch

  • Allows you to invert the way the switch operates (default is: Press UP = Switch ON // Press DOWN = Switch OFF)
    • Press UP = Switch ON // Press DOWN = Switch OFF
    • Press UP = Switch OFF // Press DOWN = Switch ON

Installation Instructions

Materials Needed:

  • SmartThings IDE Account (free)
  • Device Handler (link below)
  • PC or Mac

Open up two separate tabs on your computer’s browser.

Now, go to your first tab (SmartThings IDE) and follow the directions below:

  • Click on the green, “Login” button on the top right of the screen
  • If you have an account already, please login
  • If you don’t have an account, please create one using the same email/password as your current SmartThings account (ie: your mobile account)
  • Once logged in, click on, “My Locations” located on the top left of the screen — you should see your HUB’s location there
  • Click on your HUB’s location underneath where it says, “Name” — you may be prompted to login again — if so, please login again

Now we are going to install the device handler:

  • First, click on, “My Device Handlers” located at the top, in the middle of the screen
  • Click the green button titled, “Create New Device Handler”
  • Click on, “From Code”
  • SWITCH TO TAB #2 (ie: Inovelli NZW30 Device Handler) and copy all lines of code
  • SWITCH BACK TO TAB #1 (ie: SmartThings IDE) and paste the code in the white space
  • After you’ve pasted the code, click, “Create”
  • Then click, “Publish” and then, “For Me”

Finally, let’s change the device type to the new handler:

  • Go to, “My Devices” at the top and click on it
  • Then, search for your Inovelli Switch and click on it as well
  • Next, click on, “Edit” at the bottom and then click on, “Type” and scroll down to the bottom of the list and select the new device handler, titled, “Inovelli Switch NZW30”
  • Click, “Update” and you should now see the new handler in your ST App when you click on the Inovelli switch


Our In-Wall (Z-Wave Plus) Z-Wave Switch & Repeater comes with the following certifications. Feel free to click on the links for verification and/or download them in pdf form. Thanks again for your support and if you have any questions, feel free to contact us.

UL Listing # – E464831* | PDF | Website
FCC Certification – OXGZW36 | PDF | Website
Z-Wave Plus Certification – ZC10-17045561 | PDF | Website

* NOTE: NZW36, NZW37, NZW39, NZW30, NZW31, NZW32 all share the same UL listing. You will see a reference in the report showing all three. We just wanted to call this out in case you were wondering.


There are no reviews yet.

Be the first to review “Z-Wave Switch (On/Off) + Repeater”

Your email address will not be published. Required fields are marked *