On/Off Smart Plug + Signal Repeater (Z-Wave Plus)


Plug the Smart Outlet in. Sync. Control Lights & Appliances from Anywhere.

Control your lights and appliances in your smart house with the Inovelli® Z-Wave Plus plug-in smart outlet. In addition to being able to remotely control your devices, this smart plug also acts as a Z-Wave signal booster (repeater), giving you best of both worlds.

Save on your electric bill by setting schedules to turn on your lights, turn off your computer charger, or turn on your air conditioning an hour before you get home. In addition to the smart outlet, this plug offers an, “Always-On” outlet (non-smart) to allow you to still plug in anything you don’t want to control.  This smart plug-in module also works with SmartThings, works with Wink, works with IFTTT (if this then that), works with Amazon Alexa (Echo) and many, many more.  Now that’s awesome.

For more information on how to set this up in your home, please see our NZW36 Quick Setup page which walks you through a quick 5 minute setup.  Simplifying lives, one smart home product at a time, that’s Inovelli®.

In stock (can be backordered)

SKU: K1-6H70-9RNC Category: Tag:


Simple Setup

We hand picked this Z-Wave Plug-in Module & Range Extender because it is truly, “plug and play”, can be set up in less than 5 minutes. Plug it in, sync it and you’re done.

Remote Controllable

Turn on/off lights or appliances from anywhere in the world. Our smart plug has one, “Smart Outlet” and one, “Always On” outlet. Set schedules, or trigger an event… the power is yours!

Show Home and Inovelli Smart Plugs are Z-Wave Plus Certified

Z-Wave Plus

The 1-Channel Smart Plug is certified Z-Wave Plus, making it one of the few on the market to really take Z-Wave seriously. With a built in signal repeater, this smart outlet is really a cut above the competition.

Tested Compatible Hub's/Gateway's:

The NZW36 (1-Channel Smart Plug) been tested to work with following Hubs/Gateways listed below. In addition, feel free to check out the full installation instructions at: NZW36 Quick Setup


Non-Compatible Hub's/Gateway's:

As you can imagine there are 100’s of HUB’s/Gateway’s out there and it’s nearly impossible for us to test them all out. As of right now, any Z-Wave enabled HUB/Gateway should work with our 1-Channel plug. However, if you purchase one and it does not work with your HUB, please let us know and we’ll fully refund you.

The Z-Wave Plus Smart Plug & Repeater Plays Well With Others

As a full member of the Z-Wave Alliance, all Inovelli™ products and partner products integrate seamlessly with other Z-Wave compatible hubs, controllers and/or gateways.

What is Z-Wave?  Great question.  In layman’s terms, it is a language spoken that connects various smart home devices and is currently the world market leader in wireless control. (www.z-wavealliance.org/about_z-wave_technology/)

What does that mean to you?  Well, it means that our zwave plug-in switch module will likely work with your gateway of choice (see above for full compatibility).  It allows Inovelli® Z-Wave products to talk to non-Inovelli® Z-Wave products (there are over 1700 interoperable Z-Wave products from over 450 companies), allowing you to set schedules, trigger events, or create robots, making your life simpler and smarter.

As a bonus, the NZW36 Smart Plug acts as a Z-Wave Repeater (Range Extender), allowing greater distance for your Z-Wave network!

Additional information

Weight 0.2625 lbs


Our 1-Channel (Z-Wave Plus) Outlet & Repeater comes with the following certifications. Feel free to click on the links for verification and/or download them in pdf form. Thanks again for your support and if you have any questions, feel free to contact us.

UL Listing # – E464831* | PDF | Website
FCC Certification – OXGZW36 | PDF | Website
Z-Wave Plus Certification – ZC10-17045561 | PDF | Website

* NOTE: NZW36, NZW37, NZW39 all share the same UL listing. You will see a reference in the report showing all three. We just wanted to call this out in case you were wondering.

Setup Instructions

Please click on the following HUB for specific setup instructions. If you do not see your HUB listed, please first check compatibility under the, “Description” tab and by scrolling down to the bottom of the page. If you’re HUB is compatible, but you do not see a link below, please click on, “General Z-Wave”.

SmartThings: www.inovelli.com/nzw36-setup/smartthings
Vera: www.inovelli.com/nzw36-setup/vera
Wink: www.inovelli.com/nzw36-setup/wink
General Z-Wave: PDF

Additional Resources:


There are no reviews yet.

Be the first to review “On/Off Smart Plug + Signal Repeater (Z-Wave Plus)”

Your email address will not be published. Required fields are marked *