White Series • Thread / Matter
Smart Fan Switch
(AC Motors Only)
Not sure what will work with your fan? Click on the button below and we'll walk you through a series of questions to help you.
Pairs well with
Experience the future of lighting
Animated Notifications
Multi-Tap Scene Control
Smart Fan Mode
And Over 15 Configurable Parameters
Product details
Features
- Matter (w/Thread)
- Full Color Notifications¹
- Multi-Tap Scene Control²
- Smart Fan Mode³
- Non-Neutral Compatible⁴
- Multi-Way Compatible
1. Platforms that support notifications include: Apple Home, Google Home, SmartThings, Hubitat, and Home Assistant.
2. Only Apple Home and SmartThings support multi-taps at this time.
3. If using Smart Fan Mode in a multi-way setting, you will need to purchase an Aux Switch ("dumb" switches will not work).
4. In a non-neutral setting, you will not be able to use the, "high" setting (only low and medium will work). In addition, you cannot use the switch on an exhaust fan.
This fan switch works with AC Motors only. DC Motors are not supported.
Additional Features
- Adjustable Fan Speed
- Adjustable Ramp Rate
- Breeze Mode
- Full Color LED Bar
- Auto-Off Timer
- Overheat Protection
- Over 15+ Parameters
Please note that these features are built into the firmware and will only be accessible via local configuration at the switch (White Series Dimmer link shown for reference)
Tech Specs
- Power: 120V AC, 60Hz
- Signal (Frequency): 2.4GHz
- Operating Temperature Range: 32-95° F (0-35° C)
- Maximum Load (Amps): 2.5 Amps (No more than 2 fans on the switch)
- Range: Up to 100 meters line of sight between the Wireless Controller (HUB) and the closest Zigbee Module
- Dimensions: Depth = 1.2" (3.0cm), Height = 2.8" (7.1cm), Width = 1.6" (4.1cm)
- ETL Certified: 5027290
- FCC Certified: 2BBTA-VTM35SN
- IC Certified: 24756-VTM35SN
- Thread Certified: 13A350
- Matter Certified: CSA24424MAT43735-24
Documents
Coming Soon
Compatible Platforms
The White Series Fan Switch works with the following platforms (if you do not see your platform listed, please reach out to support):
Apple¹
Google²
SmartThings³
Home Assistant⁴
Hubitat⁵ (Excludes C-4)
1. Requires a compatible device. See Apple Compatibility Chart.
2. Requires a compatible device. See Google Home Compatibility Chart.
3. Requires a compatible device. See SmartThings Hub Compatibility Chart.
4. Requires a Thread Border Router. See Approved Thread Border Routers. Amazon Echos are not approved at this time.
5. Requires a Thread Border Router. See Approved Thread Border Routers. Amazon Echos are not approved at this time.
NOTE: This switch is not compatible with Amazon Echo as their platform does not support the Matter Fan profile at this time.
Included in the Box
1x Smart Switch
1x Neutral Wire Jumper
Instruction Manual
Switch Setup Insert
Works with an Inovelli Aux switch, or an additional Inovelli smart switch via scene control (multi-taps).
Customize the color of your LED Bar or use it for Animated Notifications which can alert you when a certain condition applies.
Set your favorite scene and press the button to make it come alive.
No neutral wire required, however, the fan speeds available are only low and medium (no high) and if installed in. a multi-way, you will need an Aux Switch.
The switch will lock in full power to your smart fan and use digital signals to turn the bulb on or off.
Use a unique tap sequence to activate scenes (ie: tap 2x = movie lights on)
One Switch to Rule Them All.
For those that desire the best, you've arrived. From the sleek full color LED Bar, to the glossy finish of the switch, to the satisfying click of the paddle, enjoy Matter and Thread's first and only premium light switch.
But this switch isn't just all looks. Under the hood, we've packed in every idea, every enhancement, and thought through every scenario your smart home could become.
Built by 1,000's of our community members, this switch redefines what smart lighting can be.
FAQs
Please see our knowledge base for more information. Additionally, you can click on the red bubble to start a chat or submit a ticket.
What router/network requirements are there for Matter devices?
You will need to make sure IPv6 is turned on. If you are operating on a VLAN, the Matter Controller/Server must also operate on that VLAN. Finally, Matter devices and controllers must be on the same L2 network.
Does this switch require a hub?
Yes, this switch requires a hub that supports Thread.
What is the difference between the Red, White and Blue Series?
To understand the differences between the various series, please check out our article which breaks down the features of each.
Can I use this switch on multiple ceiling fans?
Yes, you can use this switch with multiple ceiling fans as long as the total load is below the max amperage (2.5A).
However, there is a limitation in that your high speed will work fine, but the low and medium speeds will be reduced by half due to those speeds being regulated by capacitors, which will limit the output power.
Are there any limitations in a non-neutral setup?
Yes, if you are using this switch in a non-neutral setup, there are a couple of limitations:
- You will not be able to use the high speed (only low and medium will work).
- You will not be able to use this switch on an exhaust fan.
Can this be used on exhaust and ceiling fans?
Yes, this switch can be used on both Exhaust or Ceiling Fans if they have AC Motors. If you are looking for a switch that works as an On/Off switch for DC Motors, please check out our White Series On/Off Switch (w/Temperature and Humidity Sensing).
Can this be used with DC Fan Motors?
No, this can only be used with AC Fan Motors.
Can this be used for lighting?
No, this switch cannot be used with any sort of lighting. We recommend the White Series Dimmer Switch.
Can I use this on a shared fan and light load?
No, this switch is to only be used on AC fan loads. If your ceiling fan has both a light and fan motor, we suggest the White Series Fan/Light Canopy Module. If your exhaust fan has both a light and a fan motor, we suggest the White Series On/Off Switch (w/Temperature and Humidity Sensors).
Does this switch support 240V or 277V?
No, this switch only supports 120V. If you're looking for a 277V option, please check out our On/Off Switch (w/Temperature and Humidity Sensing).
Can you turn off the LED Bar?
Yes, you can set the LED Bar intensity (off to 100%) when the light is on or off.
Is there a faceplate included? If not, what faceplate do you recommend?
No, there is no faceplate inside the box. We recommend Lutron Claro faceplates as we based our colors off of them.