Blue Series • Zigbee
Smart Fan & Light Canopy Module
(AC Motors Only)
Not sure what will work with your fan? Click on the button below and we'll walk you through a series of questions to help you.
Pairs well with
Individual Control of Your Fan Speed & Light
Small Module That Fits in Your Fan's Canopy
Pairs Directly with Your Inovelli Smart Switch
Smart Bulb & Fan Mode
And Over 35 Configurable Parameters
Product details
Features
- Zigbee 3.0
- Individual Control of Fan Speed and Bulb Dim Level
- Smart Bulb & Fan Mode
- Zigbee Bindings*
- Leading & Trailing Edge Dimming
Please note that asterisked features are built into the firmware and will only be accessible if your hub supports it. Hubs that support these features include: SmartThings, Hubitat and Home Assistant (ZHA & Zigbee2MQTT).
This fan module works with AC Motors only. DC Motors are not supported.
Additional Features
- Multi-Endpoint Binding
(Connects the Fan Motor and Fan Light to your Blue Series Wall Switch via Zigbee Bindings) - Adjustable Dimming & Fan Speed
- Adjustable Ramp Rate for Fan Speed and Dimming
- Set Min / Max Dim & Fan Level
- Auto-Off Timer
- Default Dim & Fan Level
- Overheat Protection
- Over 35+ Parameters
Please note that these features are built into the firmware and will only be accessible if your hub supports it. Hubs that support these features include: SmartThings, Hubitat and Home Assistant (ZHA & Zigbee2MQTT).
Tech Specs
- Power: 120V AC, 60Hz
- Signal (Frequency): 2.4GHz
- Operating Temperature Range: 32-95° F (0-35° C)
- Maximum Load Light (Watts): 300W Incandescent, 150W LED, 100W CFL
- Maximum Load Fan (Amps): 1.2A
- Range: Up to 100 meters line of sight between the Wireless Controller (HUB) and the closest Zigbee Module
- Dimensions: Depth = 1" (2.54cm), Height = 3" (7.62cm), Width = 2.13" (5.41cm)
- ETL Certified: 5027290
- FCC Certified: 2BBTA-VZM36
- IC Certified: 24756-VZM36
- Zigbee Certified: Yes
Documents
Compatible Hubs
The Blue Series 2-1 Switch works with the following platforms (if you do not see your hub listed, please reach out to support):
SmartThings
Home Assistant - ZHA
Home Assistant - Zigbee2MQTT
Hubitat
Amazon Echo*
*Requires a compatible version. See Amazon Echo Compatibility Chart.
Included in the Box
1x Smart Module
4x Wire Nuts
Instruction Manual
Module Setup Insert
Connect to your Fan's Motor and Light wires for individual control of each.
Extra long antenna allows for greater connectivity to your favorite hub.
Extra small footprint (1" depth, 2.13" width, 3" length) allows for an easy fit in your fan's canopy.
Bind your favorite Blue Series smart switch to the Canopy Module to control your fan's motor and light from your switch.
Pair with a Smart Switch.
Your canopy module allows for remote control of both the fan's motor and light from your favorite app.
Take it to the next level by installing a Blue Series smart switch and bind it directly to the canopy module. Use the switches paddle to control the light and the switches favorite button to control the fan's motor.
Built by 1,000's of our community members, this module redefines what smart lighting can be.
FAQs
Please see our knowledge base for more information. Additionally, you can click on the red bubble to start a chat or submit a ticket.
Does this module require a hub?
Yes, this module requires a hub that supports Zigbee.
What is the difference between the Red, White and Blue Series?
To understand the differences between the various series, please check out our article which breaks down the features of each.
Can this be used with DC Fan Motors?
No, this can only be used with AC Fan Motors.
Does this module support 240V or 277V?
No, this module only supports 120V.
Can you control the fan's motor and light separately?
Yes, this module allows you to control both the fan's light and motor individually.