Product details

  • Zigbee 3.0
  • Monitors temperature
  • Three different button presses (tap 1x, tap 2x, hold) which can activate your favorite scenes (ie: Tap 1x = turns off lights, closes garage doors, locks doors, and sets temp to 68 for bed time)
  • Low profile and small size (just over 1.5" in diameter and .5" in height)
Tech Specs
  • Power: 1x CR2450 Battery
  • Signal (Frequency): 2.4GHz
  • Operating Temperature Range: 32-104° F (0-40° C)
  • Operating Humidity Range: 8% - 80% RH
  • Range: Up to 100 meters line of sight between the Wireless Controller (HUB) and the closest Zigbee Module
  • Dimensions: Length = 1.61" (41 mm), Height = 0.58" (15 mm), Width = 1.61" (41 mm)
  • FCC Certified: Yes
  • IC Certified: Yes
  • Zigbee Certified: Yes

    For indoor use only.

The digital manual can be found on Aeotec's website: Button Digital Manual

Compatible Hubs

The Aeotec Water Leak Sensor works with the following platforms (if you do not see your hub listed, please reach out to support):

Home Assistant - ZHA
Home Assistant - Zigbee2MQTT

Included in the Box

  • 1x Button

  • 1x CR2450 Battery

  • 1x Instruction Manual

Pair with Your Favorite Inovelli Switch

Tap your button to turn off all your Inovelli smart switches for bedtime or double-tap your button to turn all the LED Bars red to indicate dinner time for the kids.

Set up your favorite scenes with the Aeotec button -- the sky is the limit!


Does this button require a hub?

Yes, this button requires a hub that supports Zigbee.

Does the package include a battery?

Yes, the package comes with one CR2450 battery.