Product details

Features
  • Zigbee 3.0
  • Animated Notifications*
  • Multi-Tap Scene Control*
  • Smart Fan Mode
  • Energy Monitoring*
  • Zigbee Bindings*
  • Non-Neutral Compatible
  • Multi-Way Compatible

    Please note that asterisked features are built into the firmware and will only be accessible if your hub supports it. Hubs that support these features include: SmartThings, Hubitat and Home Assistant (ZHA & Zigbee2MQTT).

    This fan switch works with AC Motors only. DC Motors are not supported.
Additional Features
  • Adjustable Fan Speed
  • Adjustable Ramp Rate
  • Breeze Mode
  • Full Color LED Bar
  • Set Min / Max Fan Level
  • Auto-Off Timer
  • Default Fan Level
  • Overheat Protection
  • Quick Tap To Set Level
  • Individually Addressable LED's
  • Over 75+ Parameters

    Please note that these features are built into the firmware and will only be accessible if your hub supports it. Hubs that support these features include: SmartThings, Hubitat and Home Assistant (ZHA & Zigbee2MQTT).
Tech Specs
  • Power: 120V AC, 60Hz
  • Signal (Frequency): 2.4GHz
  • Operating Temperature Range: 32-95° F (0-35° C)
  • Maximum Load (Amps): 2.5 Amps (No more than 2 fans on the switch)
  • Range: Up to 100 meters line of sight between the Wireless Controller (HUB) and the closest Zigbee Module
  • Dimensions: Depth = 1.2" (3.0cm), Height = 2.8" (7.1cm), Width = 1.6" (4.1cm)
  • ETL Certified: 5027290
  • FCC Certified: 2BBTA-VZM35SN
  • IC Certified: 24756-VZM35SN
  • Zigbee Certified: ZIG22160ZB331395-24
Compatible Hubs

The Blue Series 2-1 Switch works with the following platforms (if you do not see your hub listed, please reach out to support):

SmartThings
Home Assistant - ZHA
Home Assistant - Zigbee2MQTT
Hubitat
Amazon Echo*

*Requires a compatible version. See Amazon Echo Compatibility Chart.

Included in the Box

  • 1x Smart Switch

  • 1x Neutral Wire Jumper

  • Instruction Manual

  • Switch Setup Insert

One Switch to Rule Them All .

For those that desire the best, you've arrived. From the sleek full color LED Bar, to the glossy finish of the switch, to the satisfying click of the paddle, enjoy Zigbee's first and only premium fan switch.

But this switch isn't just all looks. Under the hood, we've packed in every idea, every enhancement, and thought through every scenario your smart home could become.

Built by 1,000's of our community members, this switch redefines what smart lighting can be.

FAQs

Please see our knowledge base for more information. Additionally, you can click on the red bubble to start a chat or submit a ticket.

Does this switch require a hub?

Yes, this switch requires a hub that supports Zigbee.

What is the difference between the Red, White and Blue Series?

To understand the differences between the various series, please check out our article which breaks down the features of each.

Can this be used on exhaust and ceiling fans?

Yes, this switch can be used on both Exhaust or Ceiling Fans if they have AC Motors. If you are looking for a switch that works as an On/Off switch for DC Motors, please check out our Blue Series On/Off Switch (w/Temperature and Humidity Sensing).

Can this be used with DC Fan Motors?

No, this can only be used with AC Fan Motors.

Can this be used for lighting?

No, this switch cannot be used with any sort of lighting. We recommend the Blue Series 2-1 Switch.

Can I use this on a shared fan and light load?

No, this switch is to only be used on AC fan loads. If your ceiling fan has both a light and fan motor, we suggest the Blue Series Fan/Light Canopy Module. If your exhaust fan has both a light and a fan motor, we suggest the Blue Series On/Off Switch (w/Temperature and Humidity Sensors).

Does this switch support 240V or 277V?

No, this switch only supports 120V. If you're looking for a 277V option, please check out our On/Off Switch (w/Temperature and Humidity Sensing).

Can you turn off the LED Bar?

Yes, you can set the LED Bar intensity (off to 100%) when the light is on or off.

Is there a faceplate included? If not, what faceplate do you recommend?

No, there is no faceplate inside the box. We recommend Lutron Claro faceplates as we based our colors off of them.