Smart Fan Switch (3-Speed Ceiling & On/Off Exhaust)

AC Motor Fans Only

White Series • Thread / Matter

Only need a few color paddles? Order the White variant and then click here to add additional color paddles.

Not sure what series to purchase? Check out our Red vs White vs Blue Series article.

Regular price$60.00
This switch can only be used with AC Motor fans. Do not use this switch with lighting. With a neutral wire, when used as a ceiling fan switch, this switch supports 3-Speeds (Low, Medium & High). If there is no neutral present, this switch only supports 2-Speeds (Low and Medium)

Compatible with the following Hubs:

Amazon Echo
Apple HomeKit
Google Home*
Home Assistant
Hubitat (C8 Only)
Samsung SmartThings (V3 and Samsung Station only)

If you don't see your hub listed, please do not purchase this switch until confirming it's compatible by contacting us.

* Google Home - There may be some extra steps required to pair this switch if we do not certify it with Google Home in time for launch.

Power: 120V AC, 60Hz
Signal (Frequency): 2.4GHz
Operating Temperature Range: 32-95° F (0-35° C)
Maximum Load (Watts): 2.5 Amps (No more than 2 fans on the switch)
Range: Up to 100 meters line of sight between the Wireless Controller (HUB) and the closest Thread Boarder Router
Dimensions: Depth = 1.2" (3.0cm), Height = 2.8" (7.1cm), Width = 1.6" (4.1cm)
ETL Certified: TBD
FCC Certified: 
IC Certified: TBD
Thread Certified: TBD
Matter Certified: TBD

For indoor use. Specifications subject to change without notice due to continuing product improvement.

1x Smart Switch
1x Neutral Wire Jumper
1x Instruction Manual

Does not include a faceplate. Please purchase separately. We recommend Lutron Claro (Gloss - White) as a color match.

Because we constantly keep our materials up to date, we house them in a community driven knowledge base.

Please click on the link below to view the most recent document (opens in a new tab):


Z-Wave Products - Inovelli Blue Series 2-1 Switch    Aartech - Inovelli Blue Series 2-1 Switch    Aartech Distribution - Inovelli Blue Series 2-1 Switch
This product can also be found at the above vendors who are the only ones authorized and trusted to sell the Inovelli brand.
Unmatched Features.

Heads-up notifications, multi-tap scene control, energy monitoring, an individually addressable LED bar, over 60 parameters and community driven innovation make this the ultimate smart switch.


Community Built.

We take a different approach to building products. We bring them to life with the help of 1,000's of community members and the passionate beta testers. Firmware is always public and improved upon allowing your switch to be future-proof.


Yes, this switch requires a hub or gateway that supports Thread.

Yes, this switch can work in multi-way setups. However, unlike our other smart switches, this one does not support using a, "dumb" (existing) switch on one end. Instead, you must purchase an Add-On (Aux) Switch.

If used in a non-neutral setting, you will not be able to use the High setting on your ceiling fan (only Low and Medium) and you will not be able to use it on your exhaust fan.

If you have a neutral wire, this switch will work with both a ceiling and exhaust fan. If you do not have a neutral wire, it will only work with a ceiling fan (low/med speed only).

No, this switch will not work with DC Motors. Please only use this on AC Motor fans. The only exception is if you're using Smart Fan Mode and are using the Fan switch as a remote controller.

Local roots.

We spend hundreds of hours designing, testing and perfecting every Inovelli product in our Kalamazoo, Michigan headquarters.

But we aren’t your typical corporate employees. We’re people who love home automation. In fact, we all have smart homes just like you and started Inovelli because we wanted products for our own homes that weren't #basic.

Learn More