DZW32-SN

Smart Presence Sensor Dimmer Switch (mmWave)

Red Series • Z-Wave 800 Series

Not sure what series to purchase? Check out our Red vs White vs Blue Series article.
Regular price$99.00
/
On/Off portion refers to lighting only (except ballasts). Not to be used for fans, outlets, ballasts (magnetic or electric) or any inductive/motorized loads. See FAQ's for more details.

Prices shown are pre-order pricing and are a limited time offer.
Size
Color

Compatible with the following Hubs:

SmartThings
Home Assistant - ZHA
Home Assistant - Zigbee2MQTT
Hubitat

If you don't see your hub listed, please do not purchase this switch until confirming it's compatible by contacting us.

NOTE: Specs are subject to changes until further notice.

Power: 120V AC, 60Hz
mmWave Sensor: 24GHz
Signal (Frequency): 908.42 / 916MHz (Normal Inclusion), 912 / 920MHz (Long Range Inclusion)
Operating Temperature Range: 32-95° F (0-35° C)
Maximum Load (Watts): TBD
Range: Up to 100 meters line of sight between the Wireless Controller (HUB) and the closest Zigbee Module
Dimensions: Depth = 1.2" (3.0cm), Height = 2.8" (7.1cm), Width = 1.6" (4.1cm)
ETL Certified: Coming Soon
FCC Certified: Coming Soon
IC Certified: Coming Soon
Zigbee Certified: Coming Soon

For indoor use. Specifications subject to change without notice due to continuing product improvement.

1x Smart Switch
1x Neutral Wire Jumper
1x Instruction Manual

Does not include a faceplate. Please purchase separately. We recommend Lutron Claro (Gloss - White) as a color match.

Because we constantly keep our materials up to date, we house them in a community driven knowledge base.

Please click on the link below to view the most recent document (opens in a new tab):

Digital Manual
Wiring Schematics

design
The Future of Motion Lighting

A colorful LED bar catches your eye. The solid craftsmanship of the paddle gives you confidence, while the intrigue of the favorites button captures your imagination. This switch evokes the feeling of luxury while delivering an unmatched smart home experience using millimeter wave (mmWave) radar technology.


innovation
Unmatched Features.

Millimeter Wave (mmWave) equipped human presence detection, heads-up notifications, multi-tap scene control, energy monitoring, an individually addressable LED bar, over 60 parameters and community driven innovation make this the ultimate smart switch.

Loading...

Animated Notifications.

Know when severe weather is on the horizon, your alarm is armed, the garage door is left open, there’s motion at the front door and more.

Collaboration
Community Built.

We take a different approach to building products. We bring them to life with the help of 1,000's of community members and the passionate beta testers. Firmware is always public and improved upon allowing your switch to be future-proof.





Project Linus Merch

Show your support for this project by repping some custom merch!

FAQs

Yes, this switch requires a hub or gateway that supports Z-Wave.

Yes, this switch can work in multi-way setups. We recommend purchasing the Add-On switch for the best performance: Add-On (Aux) Switch.

No, Smart Bulb Mode will not work in a multi-way setup with a dumb switch. You must purchase an Auxiliary Switch.

If used in a non-neutral setting, you will not be able to have Power Monitoring, you must use an Add-On / Aux switch in a multi-way setting and you will have to purchase a bypass to install at the light fixture.

No, this switch will not work with either exhaust and ceiling fans.

No, this switch does not work with low voltage lighting and requires a full 120V.

No, this switch does not work with ballasts (magnetic or electric).

Local roots.

We spend hundreds of hours designing, testing and perfecting every Inovelli product in our Kalamazoo, Michigan headquarters.

But we aren’t your typical corporate employees. We’re people who love home automation. In fact, we all have smart homes just like you and started Inovelli because we wanted products for our own homes that weren't #basic.

Learn More