Spend $250.00 more to reach free shipping! Please note that shipping dates shown on the checkout page are estimates only and we do not guarantee delivery on the date shown.
You may also like
Recently viewed
Search
We use cookies
This site uses cookies for better user experience and analytics.
1. Platforms that support notifications include: Apple Home, Google Home, SmartThings, Hubitat, and Home Assistant.
2. Only Apple Home and SmartThings support multi-taps at this time.
3. If using Smart Bulb Mode in a multi-way setting, you will need to purchase an Aux Switch ("dumb" switches will not work).
4. Non-Neutral setups require a bypass (not included) and if you're using it in a multi-way setting, you will need to purchase an Aux Switch. Finally, energy monitoring is not available in a non-neutral setup.
Use a unique tap sequence to activate scenes (ie: tap 2x = movie lights on)
One Switch to Rule Them All.
For those that desire the best, you've arrived. From the sleek full color LED Bar, to the glossy finish of the switch, to the satisfying click of the paddle, enjoy Matter and Thread's first and only premium light switch.
But this switch isn't just all looks. Under the hood, we've packed in every idea, every enhancement, and thought through every scenario your smart home could become.
Built by 1,000's of our community members, this switch redefines what smart lighting can be.
White Series
Harness the Power of Thread & Matter.
Crafted with the best Thread and Matter have to offer, our White Series products offer unmatched compatibility with your favorite devices, unmatched reliability of Silicon Labs MG24 chipset, and unmatched features found only on Inovelli switches.
I bought a house over two years ago and have been patiently waiting for these to come out. There really is literally no other smart light switch that checks all the boxes I need other than this one here. I have 10 of these on preorder 🤞
— RighteousRaichu
They are high quality dimmers, work with most bulbs. I use the light bars for notifications - alarm on, garage door open, etc. We have started using the multi taps. For example, double tap turns off the entire basement instead of just that specific switch. On other switches, just added functionality that double tap calls the robot vac to come vacuum that room. My wife absolutely loves that.
— nyc2pit
The switches are awesome. The company is small, but they're great and very involved with the community/their customers. Highly recommend.
— max_potion
Project Jonagold
Community Built, Always.
We take a different approach to building products. We bring them to life with the help of 1,000's of community members and passionate beta testers. Firmware is always public and improved upon allowing your switch to be future-proof.
Please see our knowledge base for more information. Additionally, you can click on the red bubble to start a chat or submit a ticket.
What router/network requirements are there for Matter devices?
You will need to make sure IPv6 is turned on. If you are operating on a VLAN, the Matter Controller/Server must also operate on that VLAN. Finally, Matter devices and controllers must be on the same L2 network.
Does this switch require a hub?
Yes, this switch requires a hub that supports Thread.
What is the difference between the Red, White and Blue Series?
To understand the differences between the various series, please check out our article which breaks down the features of each.
Does this switch work without a neutral wire and what are the limitations?
Yes, this switch will work without a neutral wire, but a bypass is required to be installed at the light fixture. In addition, you will not be able to utilize energy monitoring or use a, "dumb" switch in a multi-way setup (an aux switch is required).
Can this be used on fans (exhaust/ceiling) or outlets?
This switch is meant for lighting purposes only and cannot be used to control outlets, fans, or any other inductive/motorized loads. If you want an on/off switch, please check out our Blue Series On/Off Switch (w/Temperature and Humidity Sensing) and if you want a speed control switch for a ceiling fan, please check out our Blue Series Fan Switch.
Can this be used with ballasts or transformers (including LED Strips)
Yes, you can set the LED Bar intensity (off to 100%) when the light is on or off.
Is there a faceplate included? If not, what faceplate do you recommend?
No, there is no faceplate inside the box. We recommend Lutron Claro faceplates as we based our colors off of them.
Be in the know.
Sign up for email and/or SMS updates on news, sales, and product updates by clicking the button below and check the specific lists you'd like to be subscribed to!
Choosing a selection results in a full page refresh.
