Smart 2-1 Switch (On/Off & Dimmer)
Smart 2-1 Switch (On/Off & Dimmer)
Smart 2-1 Switch (On/Off & Dimmer)
Smart 2-1 Switch (On/Off & Dimmer)
Smart 2-1 Switch (On/Off & Dimmer)


Smart 2-1 Switch (On/Off & Dimmer)

Red Series • Z-Wave 800 Series

Only need a few color paddles? Order the White variant and then click here to add additional color paddles.

Not sure what series to purchase? Check out our Red vs White vs Blue Series article.

Regular price$60.00
On/Off portion refers to lighting only (except ballasts). Not to be used for fans, outlets, ballasts (magnetic or electric) or any inductive/motorized loads. See FAQ's for more details.

Introducing Z-Wave's first certified 800 Series Light Switch powered by Inovelli. Featuring Z-Wave Long Range which boasts open air signal of up to 1 mile1, government level encryption and security, multi-tap scene control, LED notifications, power monitoring and over 60 parameters, this smart switch has it all. Best of all, it was developed by 1,000's of community members2, which makes this truly a switch for the smart home enthusiast.

1. Objects such as walls, network interference, etc will affect signal performance. This is an open air test claimed by the Z-Wave Alliance:
2. All of our products are developed by smart home owners in our community. The product development page can be found here:

Compatible with the following Hubs:

Home Assistant - ZWave JS
Home Assistant - Zwave JS UI

If you don't see your hub listed, please do not purchase this switch until confirming it's compatible by contacting us.

Power: 120V AC, 60Hz
Signal (Frequency): 908.42 / 916MHz (Normal Inclusion), 912 / 920MHz (Long Range Inclusion)
Operating Temperature Range: 32-95° F (0-35° C)
Maximum Load (Watts): 600W Incandescent, 300W LED, 150W CFL
Range: Up to 100 meters line of sight between the Wireless Controller (HUB) and the closest Z-Wave Module when included without Long Range. WE ARE TESTING LONG RANGE AND DO NOT HAVE AN OFFICAL SPEC YET.
Dimensions: Depth = 1.2" (3.0cm), Height = 2.8" (7.1cm), Width = 1.6" (4.1cm)
UL Certified: PLACEHOLDER 11
FCC Certified: 2AQ7V-VZM31SN
IC Certified: 24756-VZM31SN
Z-Wave Certified: PLACEHOLDER 4

For indoor use. Specifications subject to change without notice due to continuing product improvement.

1x Smart Switch
1x Instruction Manual
1x Neutral Wire Jumper

NOTE: Does not include a faceplate. Must purchase separately.

Because we constantly keep our materials up to date, we house them in a community driven knowledge base.

Please click on the links below to view the most recent documents (opens in a new tab):

Digital Manual
Wiring Schematics

Z-Wave Products - Inovelli Red Series 2-1 Switch    Aartech - Inovelli Blue Series 2-1 Switch    Aartech Distribution - Inovelli Red Series Series 2-1 Switch
This product can also be found at the above vendors who are the only ones authorized and trusted to sell the Inovelli brand.
Luxury meets elegance.

A colorful LED bar catches your eye. The solid craftsmanship of the paddle gives you confidence, while the intrigue of the favorites button captures your imagination. This switch evokes the feeling of luxury while delivering an unmatched smart home experience.

Unmatched Features.

Heads-up notifications, multi-tap scene control, smart bulb mode, energy monitoring, an individually addressable LED bar, over 60 parameters and community driven innovation make this the ultimate smart switch.


Animated Notifications.

Know when severe weather is on the horizon, your alarm is armed, the garage door is left open, there’s motion at the front door and more.

Smart Bulb Mode.

Control smart bulbs from your switch, even if they're directly wired.
Project phoenix
Community built.

We take a different approach to building products. We bring them to life with the help of 1,000's of community members and the passionate beta testers. Firmware is always public and improved upon allowing your switch to be future-proof.

Project Phoenix Merch

Show your support for this project by repping some custom merch!


Yes, this switch requires a hub or gateway that supports Z-Wave.

No, Smart Bulb Mode will not work in a multi-way setup with a dumb switch. You must purchase an Auxiliary Switch.

If used in a non-neutral setting, you will not be able to use a dumb switch in a 3-Way setting (only an Aux Switch), you will not have Power Monitoring, and you will likely need a bypass.

No, this switch does not support exhaust or ceiling fans. Please purchase our dedicated fan switch (coming soon).

No, this switch will not work with low voltage lighting and requires full 120V.

No, this switch does not work with ballasts.

Local roots.

We spend hundreds of hours designing, testing and perfecting every Inovelli product in our Kalamazoo, Michigan headquarters.

But we aren’t your typical corporate employees. We’re people who love home automation. In fact, we all have smart homes just like you and started Inovelli because we wanted products for our own homes that weren't #basic.

Learn More